Search for: All records

Abstract Although metal-polymer heterogeneous structures possess exceptional mechanical, thermal, and electrical properties, their fabrication remains challenging due to the reactive nature of the materials and the risk of property alteration during manufacturing. This study investigates the printing quality of metal-polymer structures fabricated using electrically assisted heterogeneous material printing (EF-HMP), focusing on the relationship between the polymer and metal layers and their electrical properties. The developed printing solution enables the transport of metal ions for metal printing onto a polymer matrix under a controlled electrical field. The study emphasizes the critical role of polymer microstructures in influencing metal electrodeposition, including printing time and morphology. Three microstructure geometries—rectangular, trapezoidal, and semicircular—were designed based on manufacturability and surface-area-to-volume ratio and evaluated for their impact on metal-polymer fabrication via EF-HMP process. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and electrical conductivity tests revealed that the semicircular microstructure provided the best printing performance, forming a robust metal structure in a short time and achieving the lowest resistance of 12 kΩ. This research highlights the potential of EF-HMP for metal-polymer fabrication, offering new insights into the influence of interfacial polymer microstructures on metal printing at room temperature. These findings pave the way for optimizing the design and functionality of metal-polymer components in metamaterials, thermal management, and flexible electronics applications. 

Abstract: Waste energy harvest using thermoelectric (TE) materials will be a potential solution to the serious environmental pollution and energy shortage problems. Due to limitations of current manufacturing techniques in geometry complexity and high density, TE devices are not widely utilized in daily life to gather waste energy. 3D printing brings an opportunity to solve the fabrication limitations. In this paper, a hybrid process was developed to fabricate thermoelectric materials by integrating hot pressing with stereolithography. The mold and punch were designed and printed to fabricate thermoelectric devices used on hot water tubes via stereolithography. The Sb2Te3 powders filled the 3D printed mold in a layered manner, and each layer of powders was compacted under the pressing of punch at a certain temperature and compressive force. The polymer mold was removed after the sintering process to form the final TE components. A series of experiments were conducted to identify the optimal heating temperature and compressive force. The microstructures morphology and electrical conductivity of fabricated Sb2Te3 samples were evaluated. This research work conducted a scientific investigation into the fabrication of TE material with a hybrid process, including hot pressing and 3D printing, to solve the current manufacturing challenges, providing perspectives on developments of TE devices used in various energy harvest applications.